|
- Advantages and Limitations of Peelaway DOES NOT CONTAIN METHYLENE CHLORIDE OR CAUSTIC. Normal ventilation is required and the product will easily hold on a vertical or overhead surface. Stays effective longer without evaporation. Product efficiency is reduced below a temperature of 40 degrees F. It may not work on some epoxy coatings and will not work on most cement.
-
|
TECHNICAL DATA:
|
| Form: |
Tan Paste |
| WT/GAL: |
11 LB |
| Flash Point: |
260 F |
| pH: |
Neutral |
-
- PREPARATORY WORK It is often impossible to know the type of coating or condition of the surface before paint is removed. Before a project is started it is important that a small test area be done typical of the surface to be stripped to ensure that the results will be satisfactory. It will allow the user to determine the important thickness at which the product is applied to the surface and the time values for removing the product.
-
- APPLICATION Apply paste about 1/16" to 1/8" according to age and thickness of coatings (pre determined by test patches) being removed by either brushing, rolling or spraying the product onto the surface being stripped. Leave on for the prescribed time frame and then remove by sliding a broad or putty knife under the paste and easing the paste away from the surface. Clean residue on the surface with a pressure wash. In some cases it might be necessary to use a scrub brush to create some agitation on the surface prior to the wash down. Collect material removed, and dispose of in compliance with local regulations.
NOTE: Protect skin and eyes from contact and wear a carbon filter mask or equivalent when working in a confined area.
COST/COVERAGE It has an average coverage of about 30 to 40 square feet per gallon. The average cost can be calculated by dividing per gallon cost by the average square footage.
-
- WARRANTY: Dumond Chemicals Inc. warrants all of its products to be free from defects, and makes no other warranties with respect to its products, express or implied including without limitation the implied warranties of MERCHANTABILITY OF FITNESS FOR PARTICULAR PURPOSE. Dumond Chemicals Inc. liability shall be limited in all events to supplying sufficient products to re-treat the specific areas to which defective product has been applied. Dumond Chemicals Inc. shall have no other liability, including liability for incidental, consequential or resultant damages whether due to breach of warranty or negligence. This warranty may not be modified or extended by representatives of Dumond Chemicals Inc. or its distributors and desires.
-
- MAINTENANCE: No special service of the tested area is required following the paint removal process. No maintenance is required for the PEEL-AWAY products.
-
- TECHNICAL SERVICES: Dumond Chemicals Inc. employs a direct personal assistance staff on hand to answer technical questions to architects, building owners, contractors, etc. Also available are trained sales representatives and technical people for on site assistance. A list of qualified contractors is also available. For assistance call our New York office (212-869-6350).
-
- Back
|
|
|
