WeatherSeal, Woodguard, and WR-5
weatherseal exterio log home finishWeatherSeal Exterior Log Home Finish
An oil/resin-based semi-transparent wood stain that, when mixed properly, achieves a thick, pudding-like texture. Its creamy thick yet penetrating formula "clings" to vertical surfaces, virtually eliminating the drippy mess and wasteful runoff typical of regular stains. Yet, like magic, it soaks into the wood leaving a rich natural wood appearance.

Creamy smooth application, no pigment settling, and uniform coverage that soaks into the wood leaving a transparent, natural wood appearance. Its highly durable oil-based resins, water proofers, and special performance boosters really hold up to the elements. Designed for use on log homes, wood fences, wood and shake siding, pressure-treated wood and most above ground wood surfaces where a longer-lasting natural wood look is desired. For decks, apply 1-2 coats (use 2 coats for new, uncoated decks). Low V.O.C. clean air formula. Fortified with borates.
WeatherSeal SPECS
Application Temperature 50°F to 95° F
Coats 2
Coverage
(sq. ft. per gal.)		 200-250
Cleanup Mineral Spirits.
PDF
WeatherSeal PDF
Notes
Due to the thick consistency of WeatherSeal, a paddle mixer is recommended to fully stir the finish before applying. See Paddle Mixers and other application equipment Here.
Special Order Colors: Driftwood and Kodiac Brown
Ground Only
Woodguard logoWoodguard
An oil-based, penetrating semi-transparent wood preservative that is also an excellent water repellent. This exterior finish is suited for log homes, rough-sawn siding, fences and wood roofs. Woodguard uses Copper 8 Quinolinolate, which is a preservative that is approved for use on food containers. Woodguard is an EPA registered wood preservative, it controls fungus, wood decay, mold, termites and powder post beetles. Woodguard also protects against cupping, curling, and warping. Application: Brush, spray, or roll on one coat to the point of refusal. 2nd coat: Apply approximately 12-18 months later. Subsequent coats should be applied according to the treatment schedule or as needed. Ask us about Penetrol for mixing with Bug Juice.
Woodguard SPECS
Application Temperature 45°F +
Coats 2
Coverage
(sq. ft. per gal.)		 75-200
Cleanup Mineral Spirits.
PDF
Woodguard PDF
woodguard swatches
Woodguard Topcoat adds a satin or gloss topcoat with additional UV protection to Woodguard. Application Temp: Above 50° F.
Coverage: 300-450 sq. ft. per gal.
Orgainiclear logo
WR-5 SPECS
Application Temperature 50°F to 90° F
Coats 1-3
Coverage
(sq. ft. per gal.)		 200-400
Cleanup Mineral Spirits.
PDF
WR-5 PDF
WR-5 A good choice for those looking for a semi-transparent finish that is comparable to what many call the “Old Forestry Mixture”. Good for high humidity areas. Also holds up well on fences, decks, railings, shakes and shingles, and outdoor furniture. Can not be sold or shipped to: California, Connecticut, D.C., Delaware, Maine, Maryland, New Jersey, New Hampshire, New York, Pennsylvania, and the North East corner of Virginia Counties: Arlington, Fairfax, Loudoun, Prince, William, and Stafford Cities: Alexandria, Fairfax, Falls Church, Fredericksburg, Manassas, and Manassa.
Ground Only
1 gal.
5 gal. 1-8 pails
5 gal. 9+ pails
$50.35
$246.75
$234.41
To Place an Order: Call Toll Free
1-800-359-6614
Prices subject to change without prior notice.