X-100 Deck, X-100 Pre-Finish, and X-100
X-100 DeckX-100 Natural Seal® Deck and Siding Stain
Provides protection against the intrusion of moisture and water on new, faded, dense and seasoned pressure treated, cedar, redwood and other hardwood decking lumber. It enables the natural wood grain to show through allowing for a natural wood finish. In the case of an old deck (greater than three years old), the grain of the wood has had an opportunity to be exposed to the general weathering conditions that naturally open its pores. Accordingly, it has been recommended for use on such surfaces, as the first and only step (resealing with X-100 Natural Seal® Deck and Siding Stain every two to four years and general maintenance with ABR® Deck and Siding Wash must be performed).
X-100 Deck and Siding
SPECS
Application Temperature 50°F+
Coats 1
Coverage
(sq. ft. per gal.)		 200-400
Cleanup Mineral Spirits or dish detergent & water.
Can not be sold or shipped to: California, Connecticut, D.C., Delaware, Maine, Maryland, New Jersey, New Hampshire, New York, Pennsylvania, and the North East corner of Virginia Counties: Arlington, Fairfax, Loudoun, Prince, William, and Stafford  Cities: Alexandria, Fairfax, Falls Church, Fredericksburg, Manassas, and Manassa.
X-100 Natural SealX-100 Pre-Finish Designed as the first coat in a two coat process for use on exterior horizontal and vertical surfaces. X-100 Pre-Finish is recommended for new, dense, and seasoned lumber including pressure-treated, cedar, redwood and other hardwoods. It may also be used as a rejuvenator for faded finishes. X-100 Pre-Finish is designed to protect wood from ultraviolet light, water intrusion, and ultimate wood degradation. Scientific studies have established that applying a U.V. wood stabilizer will ultimately protect the future finishes from cracking, chipping, peeling, and fading. It also extends color-fastness, addressing certain harsh elevation and climate conditions and eliminates the need to remove the mill glaze.
 Can not be sold or shipped to: California, Connecticut, D.C., Delaware, Maine, Maryland, New Jersey, New Hampshire, New York, Pennsylvania, and the North East corner of Virginia Counties: Arlington, Fairfax, Loudoun, Prince, William, and Stafford Cities: Alexandria, Fairfax, Falls Church, Fredericksburg, Manassas, and Manassa.
X-100 Pre-finish SPECS
Application Temperature 50°F+
Coats 1
Coverage
(sq. ft. per gal.)		 200-400
Cleanup Mineral Spirits.
PDF
X-100 and Prefinish
Natural Seal Standard Colors Standard Colors:
Clear oil finish, Cedartone Gold, Cedartone Brown, Cabin Brown and Redwood.
Ground Only
Click swatches for expanded view.
Save Money and Extend the Life of X-100 by Using X-100 Pre-Finish First!
X-100 Natural SealX-100 Natural Seal Wood The base formula for X-100 Natural Seal consists of 21 essential wood-protecting ingredients, blended in an ozone friendly 100% paraffinic oil. For use on exterior wood surfaces susceptible to moisture damage, including green and pressure-treated lumber. Ideal use for decks and sidewalls in sunny, hot, dry, and humid climates. Deep penetrating oils saturate wood fibers, protecting wood. Contains additional resin to produce a harder, more wear-resistant surface. Application: Apply 1 coat of Pre-Finish first then 1 coat X-100 with brush, roller, or spray on. Apply as much as the wood will absorb; do not oversaturate. If spraying, be sure to back brush to ensure proper surface penetration.
 Can not be sold or shipped to Canada.
X-100 Natural Seal SPECS
Application Temperature 50°F+
Coats 1
Coverage
(sq. ft. per gal.)		 75-400
Cleanup Mineral Spirits.
PDF
X-100 PDF
Natural Seal Standard Colors Standard Colors:
Clear oil finish, Cedartone Gold, Cedartone Brown, Cabin Brown and Redwood.
 Ground Only
Click swatches for expanded view.
To Place an Order: Call Toll Free
1-800-359-6614
Prices subject to change without prior notice.