|
|
|
|
|
|
|
|
|
|
|
 |
|
Albion 1000 Series Battery powered e-Drive dispensing tools offer performance, portability, more control, and they're a lot easier to use! Some of the many features and benefits of Albion’s new e-Drive System Ergonomic. Reduces trigger-hand fatigue. Continuous output. Just a slight squeeze produces a smooth non-stop flow. Safety. Pre-set pressure release. Dripless. Automatic reverse relieves pressure. Portability. No cords, no compressor, no air-lines. Power efficient. Excellent battery life per charge. Variable speeds. Accommodates multiple applications. Battery charger included.
Quart Bulk Loading T017-59-T13E $525.06
30 oz. Cartridge T017-405-15E $551.78
11 oz Cartridge T017-846-1E $472.38
Extra Battery-14 volt T01786048116563 $95.42
|
|
Albion Caulk Guns Aid in the application of chinking and caulk. We offer a variety of manual and air assist caulk guns and accessories. (See table below.)
*This bulk-loading caulk gun can be purchased, used and returned at a 50% discount! Same as renting it, but no time limitation! Just return the gun in a clean, undamaged condition (free of all caulking, residue, and rust free). |
|
|
|
|
 |
|
|
Albion B26 Series
 The "26" stands for 26:1 trigger ratio that provides 650 lbs. of thrust, easily dispensing high viscosity caulking and chinking materials as well as reducing hand fatigue.
30 oz. T017-B26Q $32.17
10.5 oz. T017-B26 $29.74
|
|
|
|
|
|
|
 Albion Follow Plate
With your gun screwed on, the Follow Plate allows for pressure-feed filling and refilling of caulk or chinking from 5-gallon pails. Made of sheet metal. For straight pails only. Works only with Albion bulk loading guns. T017-117-16 $29.56
|
|
 |
|
|
|
|
|
|
 Cox Follow Plate
Works with both Albion and Cox bulk loading guns. For both straight and tapered 5 gallon pails. The rubber gasket edge makes for exceptional ease of use.
T039-7F1016 $35.67
|
|
|
|
|
|
|
Cox Bulk Loading Guns  12:1 leverage at the trigger reduces hand fatigue. Wear Compensating Device (W.C.D.) technology provides TOTAL trigger action from the first use to the last, approximately doubling the life of the gun. Aluminum body and handle. 3 cone nozzles included. Comes with ladder hook
15" T039-51001 $94.54
|
|
|
 Cox Plastic Nozzles
For use with the Cox 15" bulk loading gun. $1.30 ea.
White 1/4" T039-2N1002
Blue 3/8" T039-2N1003
Red 1/2" T039-2N1004
|
|
|
|
 |
Note: The Cox 15" bulk loading gun comes with a blue cup installed from the factory. The blue cup must be replaced with the two green cups that come with the gun (as shown) if you will be using the gun for bulk loading of caulking or chinking. |
|
|
|
 Cox Nozzle Adapter Necessary for using plastic nozzles with the 15" bulk loading Cox gun.
T039-2N1201 $7.85
|
|
|
18" Leathers pre-installed, no ladder hook
T039-51002 $100.57
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 Caulk Gun Loaders
are made for use with Albion and Newborn 2" bulk loading caulk guns. For Cox guns, the Sleeve Adapter is required. Designed to fit standard 5 gallon pails. Just two quick cranks and the gun is filled WITHOUT air pockets. Models are available to work with straight or tapered plastic or metal pails. The loader assures complete use of all the materials in your pail; dried-out, skimmed-over, and wasted materials are prevented. Fast mechanical loading eliminates time-consuming hand loading of your caulking gun or cartridge, which results in savings of costly labor. No air pockets are possible in your caulking gun or cartridge because the air-tight piston seal assures a smooth, uninterrupted flow of material from the pail to the caulking gun and  cartridge. The screw type is recommended for both chinking and caulking products due to its increased loading strength. The screw type also has less moving parts to wear out.
 See Overview and Usage Tips
For Albion Bulk Loading Guns
T017-DL-59-T13 and T017-DL-59-T13A:
Pump Type for Caulking
(Straight Pails) T065-4-DLT $425.00
Pump Type for Caulking
(Tapered Pails) T065-PLC-4-DLT $450.00
Screw Type for Chinking & Caulking
(Straight Pails) T065-6-DLT $490.00
Screw Type for Chinking & Caulking
(Tapered Pails) T065-PLC-6-DLT $480.00
Sleeve Adapter for Gun Loader
Speeds up loading of guns. Needed for Cox. Works with all 2" bulk loading guns. As your gun fills, it slides along the tube; the yellow band lets you know when your gun is full.
T065-349 $32.54
|
Newborn Caulk Guns
Newborn Brothers Company is the largest caulking gun manufacturer in the United States. The Newborn guns work with Albion nozzles.
Model 624 15"
For 24 oz. Bulk and 10 oz. or 20 oz. Sausage.
1/2" Oval Nozzle Included (#OV-25).
T152-624-GTS $83.15
Model 632 18"
For 32 oz. Bulk and 10 oz. or 20 oz. Sausage.
1/2" Oval Nozzle Included (#OV-25).
T152-632-GTS $88.31
Both Models Equipped with:
- Adjustable Thrust Ratio (14:1 or 7:1)
- Patent Pending Gator Trigger Comfort Grip
- Rotating Barrel with Lock
- Ring Cap and 3 Cones
- Leather Cups Standard with Floating Sausage Cup
- Chamfered Barrel Ends for Easy Cup Installation
-
The PowerCaulker adapts practically any drill (variable speed drills are recommended) for applying caulking or chinking with maximum productivity and minimum labor. Easily apply caulking or chinking in cold weather. No need for air compressors or bulky air lines. Reduces the risk of carpal tunnel and eliminates repetitive motion injuries. Made from heavy-duty aluminum, steel, and delrin parts. Drill not included.
Pint T150-DELPC-10 $171.16
Quart T150-DELPC-30 $219.54
-
Flat Mixing Paddle
Paddle openings reduce resistance. 3" blade fits 1/4" drill chuck. 17-1/2" shaft. T017-162-G03 $15.57
2-Gallon Paint Mixer 2-1/4" Spiral Blade, 17-3/4" Hex Shaft, Fits 3/8" Drill. T241-340 $7.26
- 5-Gallon Paint Mixer 4" Spiral Blade, 23-1/2" Hex Shaft, Fits 3/8" Drill. T241-341 $8.66
Putty Knife
1-1/4",
Bent, Stiff.
T241-502 $6.73
- To Place an Order: Call Toll Free
1-800-359-6614
-
Prices subject to change
without prior notice.
|
|
Attaches in seconds to any cordless or variable speed AC drill. Delivers a controlled, smooth, continuous bead. Patented design for instant pressure release and quick reload. 2-year warranty. Made in U.S.A. Not for bulk caulk or chinking.
Trim Wand PadBrush (with two pads) Excellent for touch-up and trim work. Also great for chinking. 1-1/4" wide by 2" long pad.
