|
Chainsaw Attachments
|
|||
|
The Curry Log Lizard
Designed to firmly hold the guide bar perpendicular to the log, allowing for precise, square cuts. The frame is held in secure alignment by the log strap and ratchet. Four gripper bolts can be set for more accurate setup on uneven log surfaces. For best results, use a chainsaw bar that is in good shape and that has not been misused (A 7/16" hole must be drilled through the bar). The Log Lizard works on logs of any profile from 6-15 inches in diameter. The frame will seat on either the rounded portion of the log (Swedish Cope, Full Round, etc.), or on the corner (D-Shape, Dovetail, etc.). Operating Instructions. T040-LOGLIZARD $145.45 |
 |
|||
|
|
||||
 The Miter Mill is the latest edition to our line of chainsaw mills. Built with the precision and quality only known to genuine products by Accutech. Great for miter cuts up to 70 degrees for gang milling beams; custom roof trusses; gable ends or any miter angle on structurally insulated panels. The Miter Mill is second to none in versatility, durability and accuracy +/- 1/4 degree. The Miter Mill uses Accutech’s patented clamping system, which allows you to clamp anywhere on your cutting bar without drilling holes. Backed by Accutech’s Limited Lifetime Warranty and a 30-day money back guarantee. T010-MITERMILL $599.95 |
||||
|
||||
|
|
||||
 Alaskan Small Log Milling Attachment
This chain saw attachment is designed to cut slabs, lumber or timber with saws 24" or less in size. It is perfect for homeowners, woodworkers, and carpenters. It is compact, lightweight and bolts to your chain saw with no drilling. T076-G771 $135.00
EDM Tracer II Adjustable Chain Saw Guide Allows an ordinary chain saw to accurately follow intricate patterns for making dovetails on square or round stock, also slabbing and electrical cover plate scarfs. Jigs required to use this tool. T051-TRACER $190.00 Setting Gauge for EDM Tracer - Sets all EDM Tracer Guides (included in Complete Tool Package). T051-GAUGE $34.99
To Place an Order: |
 Log WizardIt makes an ordinary chain saw into a planer with a 3" cutting area. Cut notches, debark logs, or grind off knots. Fits most chain saws. Attaches easily to chainsaw bar after drilling 2 mounting holes. Uses the standard 3" planer blades. Extra sprocket included. Chain should be 2" longer to accept the new end sprocket. T191-4000 $297.00 Data Sheet Replacement 3-1/4" Blades T121-1900BHSS $36.50 Replacement Bearings T191-0407 $16.00 per pair  Micro-Mill Professionals and hobbyists alike, swear by the Micro-Mill. With almost a non existent learning curve, you will be cutting precise window/door openings, customized timbers and lumber, and completing projects in record time, with great accuracy in minutes of receiving the Micro-Mill! The Micro-Mill’s greatest strength is its extreme portability. Weighing in at only 5 lbs., you won't even notice that it's with you, until the work begins.For its size and weight, the Micro-Mill can make short work of the biggest task. From cutting custom timbers in the thick brush, to carving precision openings in a multilevel cabin construction, the Micro-Mill’s sleek, accurate movements will surprise even the most weathered tradesman. T010-MICROMILL $249.95 Micro Mill “High Precision Kit”  Just when you thought you couldn't possibly get more accurate cuts... the Micro Mill “High Precision Kit” easily bolts to your Chainsaw Micro Mill. T010-PRECISION $114.95Kit includes: • Drilling template - drill 4 holes in your Micro Mill’s “bearing housing casting” for mounting wear pads • 5 - .005” shims - removes play between the aluminum rail and the wear pads • 1 set of Wear pads (pre-drilled and counterbored) • Nuts and bolts • Step by step instructions and drawings that explain suggested hole positions for drilling a standard 2" x 4" x 1/4" thick aluminum channel. Sold separately. (Can be purchased from your local metal supply store. Recommended length 8'-12".) See Installation Guide.  Mini-Mill - This compact milling attachment combined with your chain saw makes an ideal partner as an edger for your Alaskan MKIII Sawmill (Sold Separately). Used by itself, the Mini-Mill converts logs into timbers or lumber as shown above. 12 feet of tracking included. T076-G555B $90.00 |
|||||
Haddon Lumbermaker Attaches to bar of the chainsaw to aid in sawing lumber, flattening logs, or sawing window & door openings accurately.
