E-Wood is for filling voids in decayed wood. E-Wood forms a permanent bond to most rigid surfaces. Porous surfaces should first be coated with M-Balm. Use E-Wood to replace missing sections of windowsills, frames, furniture, or any wood structure including logs. Use it to add new sections to already completed structures. Color: Wood tone. Made in the USA. 
SDS
With disposable gloves on both hands, knead together one part of E-Wood Epoxy (Part A) with one part E-Wood Hardener (Part B) by volume. Mix no more than can be applied within 15 minutes. Apply over clean and dry wood that has been treated and sealed with M-Balm liquid wood epoxy. Mold to a rough finished shape. When cured, E-Wood can be sawed, nailed, carved, machined and sanded. E-Wood can be tinted or painted. See dry pigments.
Application Temp: 40-90° F.
Drying Time: 12 to 24 hours. E-Wood cures slower in low temperatures. (Never change the mixing ratio to compensate for lower temperatures.) Clean up: Uncured mixed E-Wood (Part A and Part B) may be cleaned up with white vinegar then flushed with water.
 Restoration Special: We offer a 15% Discount off The Log Home Maintenance Guide if you buy E-Wood Epoxy Wood Putty and the book. If you call in your order, ask for the “Restoration Special”. If you order online, your discount will be applied after we receive your order. |