SKU
Trans-L&T-FlexTint

Description

Transformation Log & Timber Flex Tint Logo

Transformation Log & Timber Flex Tint Log Stain by Sashco allows for custom tinting! Use the equivalent of one full cartridge of color per 5 gallon pail i.e. you could mix half of one color with half of another for a custom 5 gallon color. If making a custom color keep in mind you are in charge of the final color. And box box box to ensure a consistent color every time.

USE ONLY Transformation Flex Tint Color Cartridges with Transformation Flex Tint Bases below. Inject color cartridge(s) with a quart size caulk gun and mix completely with a drill driven paddle mixer (3-5 minutes or until evenly dispersed) at the jobsite. Do not use Flex Tint base without adding color, even as a maintenance coat - the UV protection is primarily in the color cartridges. Do not add Flex Tint colors to other products.

 

Transformation Log & Timber is the low VOC formula of the original Transformation Log Stain. It will transform your logs and vertical woodwork from dull and lifeless to rich and brilliant - especially for restoring older logs. Transformation is excellent for restoration log work. Transformation Log & Timber is the log home stain that's easy to remember because its name describes what you want and what it provides, Transformation! Gloss sheen. Made in the USAExterior use only. pdf logo Transformation log & Timber pdfs  Technical Data | InfoSDS

Application Temp: 40-90ºF.
Coats: 3 coats are required for Natural & 2 coats required for all other Transformation Log & Timber colors.
Coverage: 1st Coat: 150-250; 2nd Coat: 300-500 sq. ft. per gal.
Method: Brush or Spray, back-brushing required for best results.
Surface Prep: It will adhere to almost any surface that is properly prepped. Be aware that any product already on the wood that contains waxes, non-drying oils, silicones, or anything that forms thick layers on the wood, can interfere with the adhesion and penetration of any stain, and must first be removed. See Technical Data for details.
Drying Time: Allow 1st coat to thoroughly dry for 24 hours (possibly longer in cold and/or humid weather) before applying additional coat.
Storage/Shelf Life: Passes 5 freeze-thaw cycles but best to store color tube cartridges @ 50-90°F. Once a Flex Tint Cartridge is open, it can be stored for 6 months, max. If Flex Tint is thickened to the point of difficult extrusion, it’s no good and should be discarded. To store an open cartridge, cover the nub with foil and a rubber band.
Cleanup: Mineral Spirits.
Transformation Log Stain Restoration ColorsFor Restoration: From left to right, the spindles show previously stained, weathered wood, the preparation steps and 2 coats each of Transformation color on the extreme right of each spindle. The "Natural" spindle has 3 coats because lighter colored stains have less pigmentation, they don't hold up as well to UV degradation so 3 coats of Natural color are required.

 

Transformation Log Stain Flex Tint on New WoodFor New Construction: The wood samples  show 2 coats of Transformation low VOC on "New Construction" wood - wood that has no previous coatings.

Not Sure on Color? Request a Wet Sample!
Transformation Log and Timber Flex Tint Colors on Pine

PaintCare Notice: Finishes shipped to: CA, CO, CT, DC, ME, MN, NY, OR, RI, VT, & WA will include an additional $0.75 per 1-gal and $1.60 per 5-gal pail sold in order to comply with PaintCare State Law Legislation. (CA is now $0.65 per 1-gal and $1.50 per 5-gal. DC is now $0.70 per 1-gal and $1.60 per 5-gal. MN & VT are now $0.99 per 1-gal and $1.99 per 5-gal pail). To find out more go to www.paintcare.org

 

0 USD